Console Codes for Stairmaster D1 Consoles

The following codes covered can be used on any unit equipped with the D1 console. This D1 console is a backlit LCD console used on the SM5 stepmill and SC5 stairclimber.

Console codes are used in Maintenance Mode of the Stairmaster D1 consoles. Press the speed up arrow, the numeric key (hashtag), and then press the Enter key once to access Maintenance Mode. The Speed Up and Speed Down arrow keys move forward and backward through the selections. Pressing Enter makes a selection. Input values and press Enter again to store your input value.

You can press Clear to exit any of the selections. Pressing Clear twice exits Maintenance Mode.

The Customize Menu is used to manage the following information:

• Change Units (select between USA and METRIC units)
• Adjust the backlight of the upper and lower screens
• Adjust the contrast of the upper and lower screens
• Language

Customize Code - Level Up, 3, Enter.

• Customize will appear on the screen.
  • You can use Speed Up and Speed Down to scroll through the Customize menu.
  • Once you find the desired topic, you select it by pressing ENTER.
    • If changing a setting within the topic, make the appropriate selection for the topic and press ENTER.
      • Exit any option by pressing CLEAR.
        • Pressing CLEAR once will return you to the main Customize Menu.
          • Pressing CLEAR twice will bring you all the way out.

Machine Status Code - Level Up, 4, Enter.

• Machine Status will appear on the screen.
  • You can scroll through this menu using the Speed Up and Speed Down keys
  • Here you can view usage stats such as:
    • Maintenance hours (shows last time unit serviced)
    • Equipment type for which console is configured (Stepmill or Stepper)
    • Console software version (console software version is important when dealing with performance problems that are electronic in nature)
    • Floors climbed
    • # of workouts
    • Run hours
  • Exit any option by pressing CLEAR.
    • Pressing CLEAR once will return you to the main Machine Status Menu.
      • Pressing CLEAR twice will bring you all the way out.

Diagnostics Code - Level Up, 6, Enter.

• Diagnostic will appear on the screen.
  • Scroll through this menu using the Speed Up and Speed Down keys.
  • Once you find the desired topic, you select it by pressing ENTER.
  • Diagnostics will allow you to perform the following tests:
    • Tach Test
    • Alternator (ALT) Test
    • HR Test (to check the function of Heart Rate)
    • Serial Ports
    • Key Test (to check the function of the keypad)
    • Display Test (to check that all the segments of the screen are lighting properly)
  • Exit any option by pressing CLEAR.
    • Pressing CLEAR once will return you to the main Machine Status Menu.
      • Pressing CLEAR twice will bring you all the way out.

Maintenance Logs Code – Level Up, 7, Enter.

• Maintenance Logs will appear on the screen.
  • Scroll through this menu using the Speed Up and Speed Down keys.
  • Once you find the desired log to update, you select it by pressing ENTER.
    • You can manage the following logs:
      • Maintenance Hours
      • QA ID Number
      • Error Log (this is helpful in understanding if an electrical problem has occurred)
    • Exit any option by pressing CLEAR.
      • Pressing CLEAR once will return you to the main Machine Status Menu.
        • Pressing CLEAR twice will bring you all the way out.

Configuration Code – Level Up, 8, Enter.

• Configuration will appear on the screen.
  • Scroll through configuration menu with the Speed Up and Speed Down keys.
  • Once you find the desired setting to configure, you select it by pressing ENTER.
    • You can manage the following configuration settings:
      
      • Change Machine ***This code is important to know since this D1 console can be used on the Stepmill SM5 and Stepper SC5***
        • Press ENTER. Press Level Up, and Change Machine will appear on the screen.
        • Press ENTER. The currently selected equipment type will display.
          • Use the Level Up or Level Down keys to change the selection.
          • Once you have the proper equipment type showing on the display, press ENTER to choose this selection.
            • Console will flash, then it will display the saved equipment type.
        • Reset Setup Data
        • Clear Error Log
        • Rest Console (Factory Reset)
        • Update Software (via USP port)