Garmin Power Meter Pedals, Calibration Prompt

The Garmin power meter pedals have an automatic calibration prompt. If the setting is enabled, you will prompted automatically to calibrate anytime the pedals connect to a previously paired device (the head unit) or watch.

You can control this automatic calibration prompt within your paired device (the head unit) or watch, from the sensor details.

  1. Power on the paired device (head unit) or watch that is paired with the pedals.
  2. Spin or rotate the crank arms a few times to activate or wake up the pedals.
  3. From the paired device (head unit) or watch, go into the paired sensors screen. Select the power meter once it is connected.
  4. Select Sensor Details.
  5. Select Calibration Prompt to toggle the feature between On and Off.

This covers how to enable or disable the calibration prompt for your Garmin power meter pedals.

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.

Articles in this section

Customer Service Hours:
8:00am - 5:00pm CST Monday to Friday