LifeFitness 4500 Treadmill Over Speed Error

Probable Cause

  1. The user is pushing the belt faster than the speed is set (more common when the unit is elevated).
  2. Control board is bad.

Corrective Action

  1. Check for the presence of error when the unit is at 0% elevation. If an error is not present at 0% elevation, instruct the user on the proper use of the treadmill.
  2. Test unit with a known good control board. Replace control board if necessary.
Was this article helpful?
0 out of 0 found this helpful



Please sign in to leave a comment.

Articles in this section

See more
Customer Service Hours:
8:00am - 5:00pm CST Monday to Friday