Notify Maintenance Incline Timeout Error on LifeFitness Next Gen Treadmills

Probable Cause

  1. Lift Motor.
  2. Level switch, negative switch.
  3. The wire harness for the lift switches is defective.

Corrective Action

  1. Cycle motor in incline manual mode and verify 120VAC at the P7 connector on the Wax/Lift PCB. If no voltage, replace the Lift Motor.
  2. Enter Diagnostics, in incline manual mode; verify the operation of the switches. Replace switches if defective.
  3. Verify the wire for continuity and replace the wire harness if defective.
Was this article helpful?
0 out of 0 found this helpful



Please sign in to leave a comment.

Articles in this section

See more
Customer Service Hours:
8:00am - 5:00pm CST Monday to Friday