Error Comm Lost on StarTrac Crosstrainer 6100 Pro

Probable Cause

Poor cable connection

Corrective Action

  • Check the cable connection between the display electronics and the lower control board.
  • Inspect the cable for any nicks, cuts, or pinches.
  • Ensure the pins are not bent or broken and are making a good connection. If necessary, using a fine-pointed object close the female pins so that the two sides are touching one another.
  • Using an ohmmeter, verify continuity through the cable. Replace cable if necessary.
  • Reset connections and retest unit.
Was this article helpful?
0 out of 0 found this helpful



Please sign in to leave a comment.

Articles in this section

See more
Customer Service Hours:
8:00am - 5:00pm CST Monday to Friday