Probable Cause
- Auto-start not responding.
- Keypad not responding.
- Insufficient battery voltage.
- Loose wire connections.
- Worn or damaged wire harnesses.
- Malfunctioning display console.
- Malfunctioning alternator control board (ACB).
Corrective Action
- Check auto-start not responding.
- Test keypad in diagnostics.
- Access Diagnostics by holding down the UP ARROW, then pressing the CLEAR key twice.
- Then press and hold COOL DOWN and then press ENTER for entry into the TEST/SERVICE MENU.
- Check the battery voltage.
- There is a 6VDC non-alkaline battery and it should test at a minimum of 6.0 VDC.
- Replace the battery if it fails to meet minimum requirements.
- Disconnect then reconnect connections.
- Inspect wire harnesses. Replace a worn or damaged harness.
- Test with substitute display console. Replace malfunctioning display console.
- Test with a known good alternator control board.
- Replace malfunctioning board.
Comments
Please sign in to leave a comment.