LifeFitness Treadmill Rear Roller Replacement, 9100,9500,9700,Next Gen



  • Hex key wrench set
  • Socket and ratchet set
  • Phillips screwdriver


  1. Turn the unit off at the power switch and unplug from the outlet.
  2. Take off each of the rear roller guards.
  3. Take out the belt tension bolts from each end of the rear roller.
  4. Place the new rear roller into position. Be sure to set proper tension and tracking of the walking belt.
Was this article helpful?
0 out of 0 found this helpful



Please sign in to leave a comment.

Articles in this section

See more
Customer Service Hours:
8:00am - 5:00pm CST Monday to Friday