Console Codes for 3300CE Stratus by Stairmaster, Customize,Diagnose

Here you find the console codes needed to customize the setup and diagnose issues of a Stairmaster 3300CE exercise bike.

Console codes require the unit to be in an "idle" state for the code to be accepted. "Idle" state means the console is not displaying an error or any message that requires data input. The display should basically be freshly powered up, scrolling the EKG or welcome message.

The following console codes are for use with C3, C4, and C5 consoles with Red LEDs.
+, 105, ENTER Clears the custom-programmed scrolling message
+, 107, ENTER, 0 Display test
+, 107, ENTER, 1 Speaker test
+, 107, ENTER, 2 Keypad test
+, 107, ENTER, 4 Software revision test
+, 1650, ENTER Program a custom workout
+, 2121, ENTER Turns on the custom scrolling message
+, 2123, ENTER Turns off the custom scrolling message
+, 7424, ENTER Changes the language of the console prompt
+, 7607, ENTER Turns on the custom message option
+, 7607, ENTER, 99 Text bar scrolling message editing function
+, 7703, ENTER Displays machine usage information
+, 7704, ENTER Allows you to turn the console speaker on or off
0, ENTER
Turns the speaker on
1, ENTER
Turns the speaker off
+, 7705, ENTER Allows you to turn the Heart Rate feature on or off
0, ENTER
Turns the Heart Rate feature on
1, ENTER
Turns the Heart Rate feature off
+, 9760, ENTER Allows you to change the units displayed by the console
0, ENTER
Changes the console to English units
1, ENTER
Changes the console to metric units
+, 9766, ENTER Allows you to turn the Clinical Mode on or off
0, ENTER
Turns the Clinical Mode OFF
1, ENTER
Turns the Clinical Mode ON (battery charger is required in this mode)
+, 97405, ENTER Changes the maximum workout time
+, 52475, ENTER Reset time limit to 60 minutes

 

The following console codes are for use with C40 consoles with Blue LCDs.
Level ^, 30, ENTER Change workout time limit
Level ^, 31, ENTER Change units
Level ^, 32, ENTER Choose the type of heart rate input
Level^, 34, ENTER Choose console language
Level ^, 35, ENTER Change contrast
Level ^, 37, ENTER Turn clinical mode on or off
Allows RPM <40 RPM, requires battery charger when in this mode
Level ^, 39, ENTER Reset to factory defaults
Level ^, 40, ENTER Display machine run time in hours
Level ^, 41, ENTER Display number of workouts
Level ^, 42, ENTER Display distance traveled
Level ^, 43, ENTER Display software revision
Level ^, 44, ENTER Display machine type
Level ^, 46, ENTER Display machine run time in hours since last cleared (used for maintenance purposes)
Level ^, 60, ENTER Test display - Screen alternates between all LCD segments turned on and a representative program screen
Level ^, 61, ENTER Test keyboard - Pressing any key displays that key's name in the display window. Press CLEAR last to exit.
Level ^, 62, ENTER Test serial port
Level ^, 63, ENTER Test alternator - Verifies alternator field routines through the console. Position yourself on the machine and press ^ for "field on". After briefly exercising you should build resistance. Press V for "field off".
Level ^, 66, ENTER Test tach response - Begin exercising on the machine. The console should regulate the alternator resistance based on the tach signal to maintain approx. 2,000 RPMs while you are exercising. If not, there is a possible problem in the AC Tap (TACH) or field circuit – check the alternator, AC Tap (Tach) wire, the field wire, the diode, the terminal posts, and the main cable.
Level ^, 71, ENTER Reset service time
Level ^, 80, ENTER Change machine type
Level ^, 81, ENTER Change Bike Gear – "24/1 prior to 10/98" or "30/1 after 10/98"
Level ^, 90, ENTER StairMaster Fit Test
Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.

Articles in this section

See more
Customer Service Hours:
8:00am - 5:00pm CST Monday to Friday