Momentum 3400CE Bike by Stairmaster Console Codes, Diagnostic and Customize

Here you will find the console codes you can use to customize the settings for your Stairmaster Momentum 3400CE exercise bike.

You will also find the codes to help with certain diagnostic tests when there are issues with your bike.

Console codes require the unit to be in an "idle" state for the code to be accepted. "Idle" state means the console is not displaying an error or any message that requires data input. The display should basically be freshly powered up, scrolling the EKG or welcome message.


Level ^, 30, ENTER Change workout time limit
Level ^, 31, ENTER Change units
Level ^, 32, ENTER Choose the type of heart rate input
Level ^, 34, ENTER Choose console language
Level ^, 35, ENTER Change console contrast
Level ^, 37, ENTER Turn clinical mode on or off
Allows RPM <40, requires a battery charger while in this mode
Level ^, 39, ENTER Reset to factory defaults
Level ^, 40, ENTER Display machine run time in hours
Level ^, 41, ENTER Display number of workouts
Level ^, 42, ENTER Display distance traveled
Level ^, 43, ENTER Display software revision
Level ^, 44, ENTER Display machine type
Level^, 46, ENTER Display machine run time in hours since last cleared (used for maintenance purposes)
Level ^, 60, ENTER Test display
Level ^, 61, ENTER Test keyboard
Level ^, 62, ENTER Test serial port
Level ^, 63, ENTER Test alternator
Level ^, 66, ENTER Test tach response
Level ^, 71, ENTER Reset service time
Level ^, 80, ENTER Change machine
Level ^, 81, ENTER Change Bike Gear
Level ^, 90, ENTER StairMaster Fit Test
Was this article helpful?
0 out of 0 found this helpful



Please sign in to leave a comment.

Articles in this section

See more
Customer Service Hours:
8:00am - 5:00pm CST Monday to Friday