Speed Calibration Console Code for StarTrac 4000 Treadmill

Caution: Do not stand on the running belt while performing these tests.

  1. Press and hold the "0", "1" & "START" keys together (or the "0", "2" & "START"). While holding the "0" & "START" keys down, release the "1" (or 2) key.
  2. The display will beep and display SETTINGS (or CONFIGURE) momentarily, then UNITS will be displayed.
  3. Press and release the "8" key.
  4. Display will read: XXX 3 .0 (if treadmill is at 0% incline, display will read: 240 3 .0).
  5. Press the "HEART" key, the display will read: CALI treadmill will go into an automatic speed calibration for about 3 minutes. Press the "STOP" key to exit Motor Test.


Was this article helpful?
0 out of 0 found this helpful



Please sign in to leave a comment.

Articles in this section

See more
Customer Service Hours:
8:00am - 5:00pm CST Monday to Friday