Performing a Display Test on a StarTrac 4000 Treadmill

***Caution: Do not stand on the running belt while performing these tests.***

To engage Display Test Mode:

  1. Press and hold the "0","1" & "START" keys together (or the "0","2" & "START"). While holding the "0" & "START" keys down, release the "1" (or 2) key.
  2. The display will beep and display SETTINGS (or CONFIGURE) momentarily, then UNITS will be displayed.
  3. Press and release the "5" key. Observe all the LEDs light up.
  4. Pressing any key once will display the EPROM version.

An alternative method to access Display Test Mode:

  1. Turn the power switch on while pressing the "5" key simultaneously on the display. Observe all of the LEDs light up.

Once the treadmill is in Display Test Mode, you may use the following keys:

  • INCLINE UP/DOWN KEYS: Lights % grade LED's one at a time, also segments of the 15-segment screen one at a time.
  • SHIFT KEY: Lights the six LEDs bordering the 15-segment display.
  • HEART KEY: Displays "HEART HEART" on the 15-segment display.
  • START (ENTER KEY): Displays "START START" on the 15-segment display.
  • 0-9 KEYS: Lights corresponding LEDs in the Number/Program Select Keys, (except for key 9), alongside the Pre-Designed Program profiles.
  • STOP KEY: Displays "WD TEST" on the 15-segment display. This activates the watchdog timer, resetting the processor and returning the program back to Start Mode.


Was this article helpful?
0 out of 0 found this helpful



Please sign in to leave a comment.

Articles in this section

See more
Customer Service Hours:
8:00am - 5:00pm CST Monday to Friday