Automatic Speed Calibration Console Code for StarTrac 4500 Treadmill

Caution: Do not stand on the running belt while performing this test.

Calibration lasts less than 3 minutes; the belt will be in motion during this test. 

To engage Automatic Speed Calibration:

  1. Press and hold the "0", "1" & "START" keys together (or the "0", "2"). While holding the "0" & "START" keys down, release the "1" (or 2) key. The display will beep and display MANAGER (or MAINTENANCE) momentarily, then UNITS will be displayed.
  2. Press and release the "8" key. Display will read: XXX 3 .0 (if the treadmill is at 0% incline, display will read: 240 3 .0)
  3. Press the "HEART" key, the display will read: CAL treadmill will go into an automatic speed calibration for less than 3 minutes. Press the "STOP" key to exit Motor Test.


Was this article helpful?
0 out of 0 found this helpful



Please sign in to leave a comment.

Articles in this section

See more
Customer Service Hours:
8:00am - 5:00pm CST Monday to Friday