Recommended Daily Maintenance for LeMond RevMaster Bikes

This video will demonstrate how to properly maintain your Lemond Revmaster with regular daily maintenance.

Tools Needed

• 15mm Pedal Wrench
• Equipment Cleaning Wipes
• Soap and Water or a Proper Cleaning Solution

Procedure

To begin do the daily recommended maintenance as follows:

Note: Left and right sides are determined as if you are on the bike.

1. Using a 15mm wrench make sure the pedals are tightened fully into the crank arms.
   1. Turn the left pedal counter-clockwise to tighten.
   2. Turn the right side clockwise to tighten.
2. Inspect the pedals for loose or missing hardware.
3. Inspect the straps for wear or damage.
4. Wipe down the machine daily with soap and water or a diluted, non-abrasive cleaning solution, or use Sportsmith's equipment wipes.
   1. You just want to wipe it down every day to make sure no sweat or contaminants sit on the equipment and get under the paint or chrome and begin the corroding.
5. Don't forget to wipe down the inside, the handlebar, and seat posts on the frame as well as the slide portion of the seat and handlebar to be sure that nothing gets to set in this area and begin the rusting process.

This concludes the daily maintenance of the LeMond RevMaster indoor cycle.