This Sportsmith learning series video will show how to level your indoor cycle for uneven surfaces.
Tools:
- Adjustable Wrench
Procedure:
- Tilt the bike from side to side and front to back to figure out which leveler should be adjusted.
- Tilt the bike onto the handlebars as shown in the video.
- Adjust the appropriate leveler to make the correct adjustment.
- To do so, loosen the lock nut.
- Spin the leveler up or down, depending on the adjustment needed.
- Tighten the lock nut.
- Stand the bike back upright.
- Check the bike again for excessive side-to-side or front-to-back movement and repeat the process as necessary.
- This concludes our demonstration of leveling your indoor cycle bike.
Comments
Please sign in to leave a comment.