Life Fitness 95Xi Crank Arm Video | How to Replace the Crank Arm

Video about How to Remove and Replace the Crank Arm on a LifeFitness 95Xi Crosstrainer

The video will demonstrate how to remove and replace a crank arm of the Life Fitness 95Xi crosstrainer.

Tools:

• 5/32" Allen Wrench
• Philips Screwdriver
• 2MM Allen Wrench
• T25 Driver
• T50 Driver

Procedure:

1. Remove the main shrouds as seen in the main shroud removal video.
2. Remove the outer link cover as seen in the outer link cover replacement video.
3. Remove the pedal lever assembly on the side where the crank arm replacement is needed.
4. Now remove the crank arm cover.
5. Loosen the bolt securing the crank arm to the crankshaft.
6. Slide the crank arm off of the shaft.
7. Take note of the washer and bearing behind the crank arm during removal.
8. Note: If you are replacing the left crank arm with the drive belt pulley attached, you should also replace the nuts and bolts securing the pulley to the crank arm.
9. Replace the parts in reverse order.