This video demonstrates how to replace the magnet and standoff assembly on your 95Xi Crosstrainer by LifeFitness.
Tools Required:
- Philips Screwdriver
- T25 Driver
- T50 Driver
- 2MM Allen Wrench
- 5/32” Allen Wrench
Procedure:
- Remove the main shrouds as seen in Sportsmith’s main shroud removal video
- Remove the outer link cover as seen in the Outer Link Cover removal video
- Remove the Left Pedal Lever Assembly as seen in Sportsmith’s pedal lever replacement video
- Remove the two bolts holding the crank arm cover in place, and remove the crank arm cover
- Remove the screw securing the magnet and standoff assembly to the drive pulley and remove the assembly from the unit
- Install the new magnet and standoff assembly in reverse order
Comments
Please sign in to leave a comment.