How to Mount an Equipment Wipe Dispenser to the Stand

This video demonstrates how to mount an equipment wipe dispenser to its stand.

Tools:

• Phillips Screwdriver
• Pliers

Procedure:

1. When purchasing the Sportsmith equipment wipe dispenser you will receive a bag of hardware that includes the key, four screws, and four wall anchors.
   1. These are to be used when mounting the dispenser to drywall or sheetrock-type surface only.
      
2. When purchasing the equipment wipe stand you will receive with the stand a bag of hardware that includes four bolts and four acorn nuts.
   1. These are to be used when mounting the dispenser to the stand.
3. Note: Always mount the dispenser in an upright manner (wipes come out the top) to prevent the liquid from draining out of the wipes and causing the wipes to dry out.
4. To begin use the key to open the stand.
5. Now place a bolt through the stand from the back and through the mounting hole of the dispenser and finger tighten the acorn nut to the bolt.
6. Once you have completed this step the dispenser will be held to the stand so that you can install the other 3 nuts and bolts.
7. Now tighten the hardware using a Phillips screwdriver and a pair of pliers.

This concludes our video example of how to mount your wipe dispenser to its stand.