How to Replace the Finger Guard on a StarTrac 4000 Treadmill

Replacing a Finger Guard on a Star Trac 4000 Treadmill

Tools Required

  • Phillips Screwdriver
  • Tools needed may vary depending on your hardware


  1. Switch the power off on the unit.
  2. Next, unplug the unit from the wall
  3. Remove the finger guard retaining screws and carefully remove the old finger guards from the deck at each end of the rear roller.
  4. Install the new finger guards onto the unit.
  5. Now, plugin and power on the unit.
Was this article helpful?
0 out of 0 found this helpful



Please sign in to leave a comment.

Articles in this section

See more
Customer Service Hours:
8:00am - 5:00pm CST Monday to Friday