Start Up Error on LifeFitness 4000 Treadmill

Probable Cause

  1. Poor connection of Opto (speed) sensor.
  2. Opto (speed) sensor is out of adjustment or bad.

Corrective Action

  1. Inspect cable and connection of Opto (speed) sensor. Repair and replace damaged cable or connection of the Opto (speed) sensor
  2. Inspect the alignment of the Opto (speed) sensor. The sensor should be centered evenly over the target. Adjust or replace Opto (speed) sensor if necessary.
Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.

Articles in this section

See more
Customer Service Hours:
8:00am - 5:00pm CST Monday to Friday