Precor Error 62, Vertical Sensor Failure (AMT12 Only)

Probable Cause

  1. Faulty or poor cable connection at the LPCA
  2. Magnet missing from the crank arm
  3. Magnet poles may possibly be reversed
  4. Vertical Sensor is defective 5. LPCA is defective

Corrective Action

  1. Check to ensure the Vertical Sensor cable connector is secure on the LPCA
  2. Verify the magnet is present in the crank arm
  3. Flip the magnet over in the crank to reverse the poles
  4. Test the unit with a known good Vertical Sensor
  5. Test the unit with a known good LPCA
Was this article helpful?
0 out of 0 found this helpful



Please sign in to leave a comment.

Articles in this section

See more
Customer Service Hours:
8:00am - 5:00pm CST Monday to Friday