These console codes are for use on Stairmaster 4400CL and 4600CL steppers. The console codes are used to customize settings and perform diagnostic testing.
Console codes require the unit to be in an "idle" state for the code to be accepted. "Idle" state means the console is not displaying an error or any message that requires data input. The display should basically be freshly powered up, scrolling the EKG or welcome message.
| +, 105, ENTER | Clears the custom programmed scrolling message |
| +, 107, ENTER, 0 | Display test |
| +, 107, ENTER, 1 | Speaker test |
| +, 107, ENTER, 2 | Keypad test |
| +, 107, ENTER, 3 | Speed test - Displays Target value and RPM. Need to exercise on the machine and verify value in RPM. |
| +, 107, ENTER, 4 | Software revision test |
| +, 108, ENTER | Heart rate software test |
| +, 1650, ENTER | Program a custom workout |
| +, 2121, ENTER | Turns on the custom scrolling message |
| +, 2123, ENTER | Turns off the custom scrolling message |
| +, 7424, ENTER | Changes the language of the console prompts |
| +, 7607, ENTER | Turns on the custom message option |
| +, 7607, ENTER, 99 | Text bar scrolling message editing function |
| +, 7703, ENTER | Displays machine usage information |
| +, 7704, ENTER | Allows you to turn the console speaker on or off 0, ENTER Turns the speaker on 1, ENTER Turns the speaker off |
| +, 7705, ENTER | Allows you to turn the Heart Rate feature on or off 0, ENTER Turns the Heart Rate feature on 1, ENTER Turns the Heart Rate feature off |
| +, 9760, ENTER | Allows you to change the units displayed by the console 0, ENTER Changes the console to English units 1, ENTER Changes the console to metric units |
| +, 9766, ENTER | Allows you to change the software version 0, ENTER Changes to 4400 PT software 1, ENTER Changes to 7000 PT software |
| +, 97405, ENTER | Changes the maximum workout time |
| Level ^, 30, ENTER | Change workout time limit between 5 to 99 minutes |
| Level ^, 31, ENTER | Change units (MPH or KMH) |
| Level ^, 32, ENTER | Choose the type of heart rate input and priority (telemetry or contact) |
| Level ^, 34, ENTER | Choose console language |
| Level ^, 35, ENTER | Changes contrast on console |
| Level ^, 39, ENTER | Reset console to factory defaults |
| Level ^, 40, ENTER | Displays machine run time in hours |
| Level ^, 41, ENTER | Displays number of workouts |
| Level ^, 42, ENTER | Displays distance traveled |
| Level ^, 43, ENTER | Displays software revision |
| Level ^, 44, ENTER | Displays machine type |
| Level ^, 46, ENTER | Displays machine run time in hours since last cleared (used for maintenance purposes) |
| Level ^, 60, ENTER | Test display - Screen alternates between all LCD segments turned on and a representative program screen |
| Level ^, 61, ENTER | Test keyboard - Pressing any key displays that key's name in the display window. Press CLEAR last to exit. |
| Level ^, 62, ENTER | Test serial port |
| Level ^, 63, ENTER | Test alternator - Verifies alternator field routines through the console. Position yourself on the machine and press ^ for "field on". After briefly exercising you should build resistance. Press V for "field off". |
| Level ^, 66, ENTER | Test tach response - Begin exercising on the machine. The console should regulate the alternator resistance based on the tach signal to maintain approx. 2,000 RPMs while you are exercising. If not, there is a possible problem in the AC Tap (TACH) or field circuit – check the alternator, AC Tap (Tach) wire, the field wire, the diode, the terminal posts, and the main cable. |
| Level ^, 71, ENTER | Reset service time |
| Level ^, 80, ENTER | Change machine type |
| Level ^, 90, ENTER | StairMaster Fit Test |
| Level ^,91, ENTER | C.P.A.T. (Fireman) Fit Test |
| Level ^,92, ENTER | F.D.N.Y. (Fireman) Fit Test |
Comments
Please sign in to leave a comment.