To engage Manager Mode:
- Press and hold the "0", "1" & "START" keys together. While holding the "0" & "START" keys down, release the "1" key only.
- The display will beep and display Manger Mode momentarily, then UNITS will be displayed.
Once the treadmill is in Manager Mode, you may use the following keys:
- INCLINE UP/DOWN KEY: Displays the next or previous parameter.
- - / + SPEED KEYS: Allows the variable to be changed within the parameter.
- START KEY (ENTER KEY): Saves the value if it has changed in the EPROM (software).
NOTE: ENTER KEY must be pressed for each value changed.
- STOP KEY: Exits Manager Mode and restarts treadmill with a "warm start".