
Maranda Lay
Activity overview
Latest activity by Maranda Lay-
Maranda Lay created an article, BowFlex Treadclimbers, Discontinued Model Support
Many repair parts are no longer supported for various BowFlex treadclimbers. Here you will find a list of BowFlex treadclimbers that support has been discontinued. Parts availability for these mode...
-
Maranda Lay created an article, Quinton Treadmill Error Code, E207
Error E207 Probable Cause: The error E207 on a Quinton ClubTrack 510 or 612 treadmill indicates a moderate motor over current issue. Corrective Action: Is the user outside the weight/speed envel...
-
Maranda Lay created an article, Cybex 525T, Lower Control Boards
The Cybex 525T treadmills have lower control boards for use on 110v machines or 220v machines. The treadmill voltage determines which board is the proper replacement. 110v Standard Lower Controller...
-
Maranda Lay created an article, NordicTrack Rower, Which Crank Puller Do I Need?
Many of the NordicTrack indoor rowers, like the RW900 and RX800 use a crank puller to remove the fan. If you have an indoor cycle, the same tool for your bike will work on your rower. The RW900 and...
-
Maranda Lay created an article, Schwinn Airdyne, Noise While Pedaling or Using Arms
The Schwinn Airdyne exercise bikes have arms that move with you while pedaling. Do you hear a noise while pedaling or using the arms? Do you hear a clunking or knocking? You have to find where the ...
-
Maranda Lay created an article, Cybex Galileo Strength - Sportsmith Support Discontinued
Sportsmith no longer has support or parts for the Cybex Galileo strength machines. Cybex discontinued its support of this line back in April 2012.
-
Maranda Lay created an article, Concept 2 Indoor Rower, What Model Do I Have?
There are various models of the Concept2 indoor rowers. Many folks find themselves asking 'What Model Do I Have?' The fan type and how it is mounted is a way to determine between models such as Dyn...
-
Maranda Lay created an article, Bowflex M6 & M8 Max Trainer, How To Replace the Power Plug
This procedure demonstrates how to replace the Power Plug with Connector on a Bowflex M6 and M8 Max Trainers. Tools required #2 Phillips Screwdriver 15mm Wrench Procedure Unplug the AC adapter...
-
Maranda Lay created an article, Schwinn Airdyne AD6, Speed Displayed on Console is Always 0
Does the Console of your Schwinn Airdyne AD6 only Display a Speed of 0? If your computer always shows 0 for the speed during a workout, read more to learn the possible causes and how to fix the p...
-
Maranda Lay created an article, Schwinn Airdyne AD6, Console Stuck in Pause Mode
Does your Schwinn AD6 Airdyne bike console seem to be stuck in Pause mode? Pause mode automatically happens when you stop pedaling during a workout. The console pauses after no RPM signal for 5 se...